Page 264 - Buffers USA 2024 Lashing Gear & Marine Hardware Catalog FlipBook

6102-03

OVERHEIGHT FRAME
®
for CONTAINER SPREADERS

OHE Frame Buffers Model 6102-7539

Technical Specifications

DESIGN
Body: The Timars OHE frame has two short-side profiles and one center beam that are bolted together and are
telescopic from 20’, up to 45’ (40’ is preset). The body has gone through Finite Element Analysis to optimize the
construction to make it strong, yet light. The frame is, of course, CE-approved according to the machinery directive.
The spreader conforms with the following standard(s) or other normative document(s) following the provisions
of Directive 2006/42/EG (machinery), annex 2: CE-labeled, SS-EN 13155+A2:2009 and SS-EN 15056:2006.

Test load certificate from 20T for each “leg” under survey by Inspecta (third-party inspection company).
Frame Assembly:
Each OHE frame is delivered in three separate pieces (if not agreed otherwise),
consisting of two short-side profiles and one center beam, to help save on
freight cost. The frame is assembled very easily in less than one hour.
The frame is then ready to use.

Dimensions:
The fixed sized OHE frame follows ISO standard base measures:
• Sizing: Telescopic, 20’ – 45’
• Free height: 2.4 m (others proposed separately on request)
• Total height: 3.15 m
• Weight: 6,614 lbs. / 3,000 kg (approx.)

Paint specifications:
• According to A4.08.C4 medium
• Degreasing, Abrasive blasting to Sa 2.5, 80u EP, 160u PUR top coat
• Color: RAL 1028 (yellow)
6102 • Total painting thickness: 240 microns
• Others to be proposed

BUILT-IN SAFETY SYSTEMS

The Timars OHE frame is an intelligent tool that helps the operator take control of some possible external errors,
such as the inside of the corner casting being partly blocked.

Safety Twistlock Blocking system (STB system):
The OHE frame is equipped with landing probes which prevents the overheight frame mechanically to lock the
twistlocks unless the overheight frame is landed correctly. Each landing probe is also verified by an inductive
sensor (IFM). A yellow LED light will indicate when all landing probes are activated (overheight frame landed
correct). To be able to lock and unlock the twistlocks of the overheight frame, all sensors must detect landed
landing probes. The overheight frame can also signal (for example, by flashing light) if one or more landing
probes fail (for example, if one or more landing probes stay in the upper position after a set time).

®
904-696-0010
E-mail: sales@buffersusa.com
6
904.696.0010 6102-3102-3 Sales@BuffersUSA.com 12/12/24