Page 329 - Buffers USA 2024 Container Hardware Catalog FlipBook

6102-06
[return to Table of Contents]

OVERHEIGHT ELECTRIC (OHE) FRAME
®
CONTAINER SPREADER SYSTEM

OHE Frame Buffers Model 6102-7539

Technical Specifications

OPERATIONAL DESCRIPTION
Timars OHE v6.0 is a fully-automatic overheight frame with electro-mechanical operation.
It works with any type of automatic container spreader of any brand (with ISO container measurements).

ATTACHING/DETACHING of the parent spreader to the Timars OHE Frame: The parent spreader (crane, reach
stacker, straddler carrier, etc.) should be located on top of the Timars OHE frame, as on a regular container. The
driver of the crane, reach stacker, straddler carrier, etc. now locks the twistlocks of the parent spreader. This will
start up the overheight frame from sleep mode, making it ready to operate.

Detaching the parent spreader from the Timars OHE frame is simply done by unlocking the twistlocks of the
parent spreader at any time when the Timars OHE Frame is put down. It can be put anywhere, for example: on the
quay, on a trailer or onto a container.

LOCKING & UNLOCKING of Timars OHE frame twistlocks: The operator then lands the overheight frame onto
a flatrack/open top container. When all four landing probes are affected (the overheight frame has landed
correctly) the operator receives a yellow light from the LED light indication panel. The operator now initiates
an open–lock sequence with the spreader. The open signal from the spreader is used to lock the twistlocks to
the container, using two electro-mechanical actuators (one on each side of the overheight frame) which are
connected to a rod on the twistlocks.

The LED lights indicate the twistlock status (locked and unlocked). A red light indicates that overheight frame
twistlocks are locked, and a green light indicates that overheight frame twistlocks are open. This can be
customized with different colors.

Same procedure for unlocking the container: land the container, and when the overheight frame rests on the
container the landing probes detect this. The operator makes an open-lock sequence with the spreader, and the
twistlocks turn to open. This is indicated by the LED lights.

DOCUMENTATION 6102
Three complete sets of manuals for maintenance, operation and setup in English language (Certificates in English)
are included. All documentation also provided on one CD or DVD. Other documentation to be advised.

Other Certificates: Timars Svets & Smide AB is both approved ISO 9001:2008, ISO 14001:2004 and ISO 3834-2
company. All welders are licensed, and each frame follows a well-documented, quality program.

Equipment warranty: All equipment supplied is guaranteed against bad workmanship and failure of any components
other than normal usage over a two-shift period (16 hours). Guarantee is valid 12 months from date of delivery.

BUI_6102-7539_Timars_OHE_Frame_Specs
® Rev. 2024-02-27
904-696-0010
E-mail: sales@buffersusa.com
6
6102-5102-5
904.696.0010 | Sales@BuffersUSA.com | BuffersUSA.com 7/24/24
10180 New Berlin Road • Jacksonville, Florida 32226
WAREHOUSES: Jacksonville, FL • Houston, TX • Indianapolis, IN • Los Angeles, CA